Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 305 mm. The design consists of a Ø 25 mm, L — 255 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. The plastic details are made of fiberglass-reinforced polyamide. ...
Technical Details:
The assembly is designed for installation of the transducer at a distance of 300 mm from the mounting point on the ELLING OPTIMUS belly boats (float tube) boltrope. It includes the transducer arm mount and an Mx mounting system. The design consists of a transducer fastening with an M6*50 DIN 931 bolt and a square knob nut that is connected to the Ø 22 mm (...
Technical Details:
Designed for mounting a lighting (a flashlight) on holders for an action camera equipped with an additional 2-to-3 GoPro mounting connector. The design consists of a bracket that is fixed in the mounting connector of the camera holder, a swivel mechanism that allows you to 360° rotate the holder along with the lighting (a flashlight); an inner pad and an e...
Technical Details:
The system is designed for mounting accessories provided with male adapters on PVC inflatables. Consists of an Fs219 mount and a mounting pad (110 x 110 mm), reinforced with a polyamide washer. The mount comprises a female adapter. Fastened to the pad with four M6*20 DIN 912 screws and M6 DIN 934 nuts. The system is glued on the surface using two-component...
Technical Details:
The system is designed for mounting on board of PVC inflatables the accessories with male adapters shaped as a 12 pointed star. It consists of an Fs219 mount and a pad (140 x 140 mm) reinforced with a polyamide washer. The mount comprises a female adapter. Fastened to the pad with four M6*20 DIN 912 screws and M6 DIN 934 nuts. The system is glued using two...
Technical Details:
The system is designed for mounting accessories provided with male adapters on tubes of Ø 22 and 25 mm. Consists of two Fs219 mounts and a pad, parts of which are fastened together with four M6*55 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. Both mounts compr...
Technical Details:
The system is designed for mounting accessories provided with male adapters on tubes of Ø 30 and 32 mm. Consists of two Fs219 mounts and a pad, parts of which are fastened together with four M6*60 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. Both mounts compr...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on hard, flat, smooth surfaces of vessel (aluminum, fiberglass and laminated wood). Consists of an Fs219 mount and a mounting pad (110 x 110 mm), the base of which is covered with 3M VHB tape. The mount comprises a female adapter. Attached to the pad wit...
Technical Details:
The set has been designed for installation of a fish finder monitor or a transducer on the PVC boats. The assembly includes the Sl223 plate for fish finder and a telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate 106 х 98 mm has a male adapter shaped as a 12 pointed star and is connec...
Technical Details:
The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. The assembly includes the Ss223 plate for fish finder and telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate (164 х 68 mm) has a male adapter shaped as a 12 pointed star and is connected ...
Technical Details:
The kit has been designed for installation of fish finder monitor and transducer on the PVC boats. The design comprises the Ft450 set for mounting of the fish finder and the transducer, and the Fp224 mounting system. The assembly includes the plate for fish finder and the telescopic holder for mounting the sonar at a depth from 295 to 490 mm. The swivel p...
Technical Details:
The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. The assembly includes the Ss223 plate for fish finder and telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate (164 х 68 mm) has a male adapter shaped as a 12 pointed star and is connected ...
Technical Details:
It has been designed for installation of the fish finder on the different vessels. The assembly includes the Sl223 plate and the transducer mount. The plate (106 х 98 mm, the wall thickness is 3 mm) is equipped with a male adapter shaped as a 12 pointed star which rotates 360°. The plate is connected to the tube (Ø 20,4 mm, L — 170 mm) which is attached to...
Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on a kayak or belly boat (float tube). The design consists of the transducer mount with an M6*50 DIN 931 bolt and square knob nut that is joined to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and the tilt joint. The joint wit...
Technical Details:
The kit has been designed for installation of the fish finder and transducer on board of inflatable boats which are equipped with T-Track mounting pads. It comprises the Ft450 assembly for installation of the monitor and the transducer and the Fs218 mount with a bottom T-Bolt. The telescopic transducer arm mount allows the equipment to be mounted at a dept...
Technical Details:
Is designed to hold three spinning rods. Consists of two rod-racks and a pair of FMp224 mounting systems. The design of each rack comprises a Ø 20 mm tube of 430 mm length, and three pairs of brackets with elastic clamps. The tube is connected with an adapter, which is fixed in the mount of the FMp224 system, by a tilt joint with 15° splines. To fix a tilt...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FFr222 mounting system. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 934 nut with a hex knob) and ...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMp224 mounting system for inflatable PVC cylinders. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 93...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMp225 mounting system for installing on the inflatable PVC cylinder. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMr132 mounting system for installation on tubes Ø 30/32 mm. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an...
