Technical Details:
The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. The assembly includes the Ss223 plate for fish finder and telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate (164 х 68 mm) has a male adapter shaped as a 12 pointed star and is connected ...
Technical Details:
Designed for mounting action cameras at a distance of up to 710 mm from the installation place. The design comprises a 1/4'' screw thread and a 2-to-3 GoPro connector, attached to a two-stage telescopic tube (length adjustment from 420 to 710 mm) with a spline joint. The tube is connected to the male adapter shaped as a 12 pointed star using a 27.7° spline...
Size S - Kit for Mounting of Fish Finder up to 7″ and Transducer on a Belly Boat CyllinderSize M - Kit for Mounting of Fish Finder 7″ — 9″ and Transducer on a Belly Boat CyllinderTechnical Details:
The kit has been designed for installation of a fish finder and a transducer on the belly boat (float tube) cylinder. It comprises the Ss223 plate, the FTr300 transducer arm mount...
Technical Details:
Designed for supporting electric motor arms, the diameter of which is up to 50 mm. The assembly includes an Rh101 holder, an SBa038 adapter and an Fs223 T-Track adapter. The design of the holder consists of a body with an elastic clamp and external protrusions for its fixing, connected to the swivel-tilt adapter with an M6*40 DIN 912 screw and an M6 nut DI...
Technical Details:
Designed for mounting action cameras at a distance of up to 1046 mm from the installation point. The structure consists of a 1/4'' screw thread and a 2-to-3 mounting connector, fastened to a telescopic two-stage tube (adjustable in length from 460 to 1046 mm) by a spline joint. The tube is fastened to a male adapter shaped as a 12 pointed star using a 27.7...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FFr222 mounting system. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 934 nut with a hex knob) and ...
Technical Details:
It has been designed for installation of the Garmin Panoptix LiveScope transducer and transducers with side mounting. The design consists of an eccentric tube Ø 20,4 mm (L — 400 mm), connected to a similar tube (L — 170 mm) by a two-element clamp and to a tube (L — 120 mm) with 7.5° spline tilt joint. The design is fixed into the mount by a male adapter sh...
Technical Details:
The kit has been designed for installation of the fish finder and transducer on board of inflatable boats which are equipped with T-Track mounting pads. It comprises the Ft450 assembly for installation of the monitor and the transducer and the Fs218 mount with a bottom T-Bolt. The telescopic transducer arm mount allows the equipment to be mounted at a dept...
Technical Details:
Designed for supplementing action cameras monopods with 2 additional support points. The design includes two telescopic struts that are attached to the monopod using 2 two-element collars. The structure of each consists of 2 telescopic tubes (Ø 20.4 mm, L — 250 mm), a male adapter shaped as a 12 pointed star, a ball joint, the tilt 15° spline joint, an exp...
Technical details:
It is intended for organizing the things on the vessel. The design consists of a board (282 x 380 mm), an Fs219 mount attached under the surface with four 6.3*16 DIN 9200 self-tapping screws, a swivel-tilt male to male adapter with a 27.7° spline joint including a knob with an inserted M6 DIN 934 nut, a spring and an M6*55 DIN 933 bolt. Eight neodymium mag...
Technical Details:
The kit has been designed for installation of fish finder monitor and transducer on the PVC boats. The design comprises the Ft450 set for mounting of the fish finder and the transducer, and the Fp224 mounting system. The assembly includes the plate for fish finder and the telescopic holder for mounting the sonar at a depth from 295 to 490 mm. The swivel p...
Technical Details:
The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. The assembly includes the Ss223 plate for fish finder and telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate (164 х 68 mm) has a male adapter shaped as a 12 pointed star and is connected ...
Technical Details:
It has been designed for installation of the fish finder on the different vessels. The assembly includes the Sl223 plate and the transducer mount. The plate (106 х 98 mm, the wall thickness is 3 mm) is equipped with a male adapter shaped as a 12 pointed star which rotates 360°. The plate is connected to the tube (Ø 20,4 mm, L — 170 mm) which is attached to...
Technical Details:
Is designed to hold three spinning rods. Consists of two rod-racks and a pair of FMp224 mounting systems. The design of each rack comprises a Ø 20 mm tube of 430 mm length, and three pairs of brackets with elastic clamps. The tube is connected with an adapter, which is fixed in the mount of the FMp224 system, by a tilt joint with 15° splines. To fix a tilt...
Size S - Is designed for mounting from 1 to 5 accessories provided with male adapters shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 350 mm), two FMr132 mounting systems and an Fs219 mount attached to a mounting pad (the elements of which are fastened together around the tube with four M6*60 DIN 912 screws and M6 DIN 934 nuts) which is attached to a m...
Size M - Designed for fixing from 1 to 6 accessories provided with a male adapter shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 500 mm), three FMr132 mounting systems, two RLp032 collars with male adapters (each collar includes an M6*40 DIN 933 screw, an M6 DIN 934 nut, an M6*35 DIN 931 bolt and a hex knob). Parts of each FMr132 system are fastened t...
Technical Details:
Designed for mounting fish finders with a screen diagonal from 9″ to 12″. The structure consists of a plate (220 x 52 mm), a compact mount with a male adapter shaped as a 12 pointed star, which is screwed on the back side of the platform using an M6*16 DIN 965 screw and an M6 DIN 985 self-locking nut, an Ab038 male adapter with a 1.5″ (38 mm) ball, an Sb03...
Technical Details:
It has been designed for mounting of the Garmin Panoptix LiveScope transducer. The assembly also includes the compact mount, which allows the plate for fish finders to be installed. The design consists of two eccentric tubes Ø 20,4 mm: L — 530 mm and L — 170 mm, which are connected by the two-component clamp. The assembly also includes a tube (L — 120 мм),...
Technical Details:
Designed for fixing from 1 to 7 accessories provided with a male adapter shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 700 mm), three FMr132 mounting systems, two RLp032 collars with male adapters (assembly of each includes an M6*40 DIN 933 screw, an M6 DIN 934 nut, an M6*35 DIN 931 bolt and a hex knob). Parts of each FMr132 mounti...
Technical Details:
Designed for installation of fish finders with a screen diagonal from 9″ to 12″. Consists of a plate (220 x 52 mm), a mount with female adapter, screwed on its back side using an M6*16 DIN 965 screw and an M6 nut DIN 985, a male adapter with a 27.7° splines tilt joint completed with 7.5° washers (Dp230 model), reinforced with an M6*25 DIN 931 bolt. The til...
