BORIKA Fish Finder Transducer Arm Mount (L — 300 mm) for Inflatable Motorboats Ft300

Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on the transom. The design consists of the transducer mount with an M6*50 DIN 931 bolt and a square knob nut, that is connected to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and tilt joint. The 27.7° main spline joint is equipped with 7.5° adapter washers, a spring and an M5*60 DIN 912 screw. The tilt position and rigidity of the joint is adjusted by a knob with the inserted M5 DIN 934 nut. The main parts are made of fiberglass-reinforced polyamide. The tube is made of anodized aluminium. Fasteners — of A2 (AISI 304) stainless steel.

Product description:
It’s one of the most easy and compact models of the transducer arm mount, handy for mounting transducers on the transom of inflatable motorboats.
Allows transducers (sonars) from Lowrance, Raymarine, Garmin and Humminbird and others to be installed at a distance of up to 30 cm from the mounting point.
To secure the transducer use a 50 mm bolt, adjusted washers with small splines and a square knob nut.
The design has a tilt spline joint that adjusts the position of the equipment in 7.5° increments. The knob nut allows the structure to be fixed in the raised position when the transducer is not in use.
Can be easily fixed in any BORIKA FASTen® mounting system pre-installed on the transom (the FMb, FFr444 systems or Mb218 pad with the Fs218 mount are suitable).
The tube that is the basis of the structure is made of anodized aluminium, which protects the metal against rusting and adverse environmental influences.
Materials: fiberglass-reinforced polyamide, anodized aluminium, A2 (AISI 304) stainless steel.
In the package: an Ft300 transducer arm mount.
Tips on using & installation:
To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.